Products
Gutter bracket on the frontal board
Gutter bracket on the frontal board

Gutter bracket on the frontal board

Length = 6 cm

Holder thickness = 1 mm

Width = 30 mm

It has four holes for the dowel.

The holder of the gutter on the front plate of Aqueduct ™ has the best design among the drainage systems of metal.

The chute is easily mounted in the holders and is secured with the help of a back bend.

Gutter holder The Aqueduct ™ is convenient to install thanks to 4 recessed holes for the dowel: pre-mounted holders on the frontal surface, easily installed using two oval holes, and only then fixed in position with two round holes.

Superdensity of 1 mm, layered zinc 275 g / m2 and factory color of 35 microns on both sides.

This ensures a 100% match in color and uniform fading with the entire drainage system.

The gutter holder is mounted to the eaves (frontal) roof board.

Colour: RAL 8004

50 грн

Back to list

Where can one buy

Gutter bracket on the frontal board

Length = 6 cm

Holder thickness = 1 mm

Width = 30 mm

It has four holes for the dowel.

The holder of the gutter on the front plate of Aqueduct ™ has the best design among the drainage systems of metal.

The chute is easily mounted in the holders and is secured with the help of a back bend.

Gutter holder The Aqueduct ™ is convenient to install thanks to 4 recessed holes for the dowel: pre-mounted holders on the frontal surface, easily installed using two oval holes, and only then fixed in position with two round holes.

Superdensity of 1 mm, layered zinc 275 g / m2 and factory color of 35 microns on both sides.

This ensures a 100% match in color and uniform fading with the entire drainage system.

The gutter holder is mounted to the eaves (frontal) roof board.

Colour: RAL 8004

50 грн

Back to list

Where can one buy

Popular products
Rain gutter 2m
Rain gutter 2m
Outer corner 135°
Outer corner 135°
Gutter bracket middle 24 cm
Gutter bracket middle 24 cm
Gutter bracket on the frontal board
Gutter bracket on the frontal board
Bend
Bend
Downpipe 3m
Downpipe 3m
Inner corner 135°
Inner corner 135°
Gutter end
Gutter end
Downpipe 1m
Downpipe 1m
Gutter bracket middle 24 cm
Gutter bracket middle 24 cm
Connecting downpipe 1m
Connecting downpipe 1m